Please use this identifier to cite or link to this item:
http://hdl.handle.net/2289/7859| Title: | Design of standard loads for calibrating the receiver at the antenna port |
| Authors: | Raghunathan, A. Sandhya S, Arasi |
| Issue Date: | 13-May-2019 |
| Citation: | RRI-EEG Internal Technical Report |
| Abstract: | Generally receiver systems are calibrated for their gain and phase characteristics using standard loads such as Short, Open and 50 ohms. In all these modules, connecting ports have two terminals – centre conductor and the ground. So connecting them to receiver modules having similar port types do not create any problem. However, to connect them to antenna port which has only centre conductor, we normally face difficulties due to port mismatch. To solve this problem, a microstrip transmission line based standard loads are designed which can be used to calibrate at the antenna port. This report presents the methodology of designing loads for the antenna port. |
| Description: | Restricted Access |
| URI: | http://hdl.handle.net/2289/7859 |
| Copyright: | 2019 Raman Research Institute, Bengaluru |
| Appears in Collections: | Technical Reports (EEG) |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| std_load_for_calibrating_at_antenna_port_internal_report.pdf | Restricted Access | 488.33 kB | Adobe PDF | View/Open |
Items in RRI Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.